Adding Tools to HIPE

Task, tools and variables

Tools are processing units that operate on specific data elements.
From the Java point of view, a tool is an implementation of the Tool interface.
Tasks are examples of tools within HIPE. In this case, TaskTool is used under the hood. See the topic on WritingTasks for details.

If a data element is selected, a list of tools that can operate on that element should appear. Double clicking on the tool will open an associated view (for non-task tools) or a dialogue window for settings parameters (for task tools).

This section explains the following:

  • How you can create a tool and register it, so that it becomes available for specific data.
  • How you can make HIPE aware of an existing Task.
  • How your task can react better to an active data element.
  • The default task dialogue window.
  • How you can implement and contribute a specific parameter editor

Adding a task as a HIPE tool

Registering tasks

You can made you task globally available to the system by specifying an instance of that task within a Jython file (usually called for HIPE internal modules) that is read by HIPE at startup (see My first Java HIPE task). For example:
    # file
    compute = ComputeTask()

To make your task appear in the Tasks view, you need to add the following lines to the Jython file:

    from herschel.ia.task.views import TaskToolRegistry
    toolRegistry = TaskToolRegistry.getInstance()

You can also specify that your task belongs to one or more Category :

    from herschel.ia.gui.kernel.Tool import Category
    toolRegistry.register(compute, [Category.IMAGE, Category.PACS]))

Your task is now enabled whenever the users selects a session variable of the same type as the first input parameter of your task.

To define the prime parameter, modify your task constructor as follows:

    class ComputeTask extends Task {
       ComputeTask() {
          prime = new TaskParameter("spectrum", SpecificProduct.class)

Tasks Naming Conventions

Tasks registered in HIPE should follow the naming conventions shown in this example:

  • Name of the class: ReduceTask
  • Name of the task (given by getName()): reduce
  • Name of the task variable in Jython: reduce

Warning, important For naming tasks follow the Java conventions, that is, use camelCase and avoid underscores: reduceLight is valid, reduce_light is not. HIPE displays info log messages for invalid task names. Note that task names are used as variable names (of type Task) automatically created when starting HIPE.

Validating prime input

If you followed the instructions in the previous section, your task now appears in the Applicable category of the Tasks view whenever a variable of the same type as the prime input is selected.

Sometimes this may not be enough. Your task may only run on a SpecificProduct if it contains certain contents: a typical example is a SPIRE task operating on an ObservationContext: clearly, such task should not be listed when a HIFI observation is selected.

To restrict a task to certain product contents, write a ParameterValidator:

    prime = new TaskParameter("spectrum", SpecificProduct.class)
    prime.setParameterValidator(new ParameterValidatorAdapter() {
        public void validate(Object value) throws ParameterValidationException {
            SpecificProduct s = (SpecificProduct)value;
            if (! ( _[logic that would validate the contents of the value]_ )) {
                throw new ParameterValidationException( _[reason]_ );

Note how the validation logic is now within the parameter validation block, rather than in the preamble or execution block of your task. One advantage is that the execution block of your task can concentrate on the core algorithm.

Task dialogue windows

HIPE generates a default input dialog for all registered tasks. The dialog has three sections: Input, Output and Info, each of which can be collapsed. The following two figures show the interface of the crop task, with extended and collapsed sections:



Parameters are listed in two columns. HIPE lists the parameters from left to right and top to bottom. If a single input or output parameter is present, this fills a whole line.

This automatic layout may not suit your task for several reasons:

  • A parameter may need several input fields (see for instance the angle parameter of the rotate task, in the figure below).
  • You may only want to provide a sub-set of parameters (and leave the full set to expert users on the command line).
  • You may want to organise your parameters by grouping them in tabs, or putting a border around a group of parameters.
  • You may want to have more informative tooltips, labels or even input fields that are more suitable to your task.


The following sections explore three ways to customise your task dialogue windows:

  • Parameter modifiers
  • Signature components
  • Custom task panels

Parameter modifiers

Each parameter field in the input area of a task dialogue window corresponds to a Modifier object. HIPE adds Modifier objects according to the types of input parameters in the task signature.

For instance, the crop task displays five input parameters: image, row1, column1, row2, column2:


HIPE provides modifiers for the simple types Boolean, Integer, Float, Long, Double, String and few more, so there is still a lot of room for improvements and contributions. You can find the general available modifiers in the herschel.ia.gui.apps.modifier package; please consult the Javadoc of your HIPE installation.

If no default modifier fits your task parameter, you can implement a custom Modifier and register it to the system. You can also write your specific Modifier for one of the already available types. In that case, you can create your modifier in a custom Signature Component.

Warning, important NOTE:
The following behaviours and limitations are present in the provided modifiers:

  • While you can always write SomeTask(param = null) on the command line, using a task dialog you will get SomeTask(): the task will interpret null as if the parameter has been ignored by the user.
  • Modifiers have no notion of the optionality of parameters: if they have a valid value, they will return it. The task machinery will not generate a parameter assignment if the value equals the default.
  • Specialized modifiers will mark as erroneous any variables incompatible with the type (dynamically), but will accept any variable.

Implementing a modifier
Your modifier should extend AbstractModifier, which in turn implements the Modifier interface. Both reside in the ia.gui.apps.modifier package. The Modifier interface consists of two explicit contracts:
  • Support of drag and drop features (by indirectly extending setVariableSelection and getVariableSelection in the ia.gui.kernel package)
  • Support object inspection (via the setObject and getObject methods)

Modifiers must also honour two implicit contracts:

  • Deriving from JComponent
  • If registered in the Extension Registry, providing an empty constructor

Registering a modifier
You can register your modifier via the Extension Registry with the following syntax (please note the name of the factory: factory.modifier):


Be aware that the registration is system-wise, so it overrides any other registered modifier for that type.

In case the modifier you have created is only applicable to a specific task or even to a specific parameter of a specific task, you can simply assign it to the applicable task parameter:

    // YourTask constructor
    public YourTask() {
        addTaskParameter(new TaskParameter("someInput", MyClass.class));

    // Customise your modifiers
    public Map<String, Modifier> getCustomModifiers() {
	Map<String, Modifier> map = new LinkedHashMap<String, Modifier>();
	map.put("someInput", new MyModifier());
	return map;

Signature components

In case the default input area based on modifiers does not fit your needs, you can replace it by your own implementation, and register it to the system. The following sections show you how this is done.

Implementing a task signature component

You can create a task signature component by extending JTaskSignatureComponent in the ia.task.gui.dialog package, and providing your own implementation of the makeModifierMap() method.

The JTaskSignatureComponent class implements the TaskSignatureComponent interface, which consists of four explicit contracts:

  • Support the setVariableSelection for initial assignment from the Tool Window
  • Assign the Signature to display (setSignature)
  • Return a map of parameters and assigned values (in Map<TaskParameter, VariableSelection> getParameters)
  • Clear and check user inputs implementations (used by the default buttons)

Task signature components must also honour two implicit contracts:

  • Deriving from JComponent
  • If registered in the Extension Registry, providing an empty constructor

Conventions for labels for input parameters: to construct the labels of your parameters you can use the static function of class JTaskSignatureComponent

 public static JLabel getDecoratedLabel(TaskParameter tp, boolean isPrimeInput, String altName) 
it provides a decorated label (including tooltip) that follows the standard style. For the function to work properly your task parameters should be fully configured (for example, the parameter description will be the tooltip of the label) if present.

For example, if you want to use a custom Signature Component that just wants to use ia.gui.apps.modifier.JFilePathModifier for a parameter aimed for a file name, you could do it like this:

public class MySignatureComponent extends JTaskSignatureComponent {

    private static final long serialVersionUID = 1L;

    protected Map<TaskParameter, Modifier> makeModifierMap() {

	SignatureApi signature = getSignature();
	Map<TaskParameter, Modifier> m = new LinkedHashMap<TaskParameter, Modifier>();

	m.put(signature.getTaskParameter("file"), new JFilePathModifier(SAVE));
	m.put(signature.getTaskParameter("number"), new JIntegerModifier());

	return m;

Warning, important NOTE:
You no longer need a signature component to choose your own modifiers for your task (and link them with events ...): Task has a new function

public Map<String, Modifier> getCustomModifiers()
where you can do just that, see above "Register a Modifier".

Register a Task Signature Component

The registration of the Task Signature Component is done again in the via the Extension Registry with the usual syntax (please note the name of the factory: factory.editor.tool.task.signature).

        "Rotate Signature",

See also the Extension Registry documentation for more details.

Custom Task Dialogs

Eventually, if the above options still do not accommodate you needs you can replace the the default Task Panel with your own implementation

If this is the case you need to:

  • Implement a Task Panel
  • Register it to the system.

Implement a Task Panel

The ia.task.gui.dialog.TaskPanel interface consists of three explicit contracts:
  • Support the setVariableSelection for initial assignment from the Tool Window
  • Assign the Task to display ( the setTask)
  • Notify request of executions to the framework by
    • Allow for setting the Site Event handler for notifying request of execution (the setSiteEventHandler method)
    • Notify the execution requests calling the trigger method of ia.gui.kernel.SiteEventHandler passing a ia.gui.kernel.event.CommandExecutionRequestEvent.
      You can create this event through the ia.task.gui.dialog.TaskCommandExecutionEventFactory.
  • Return the javax.swing.Actions for running the task and resetting (clear) the signature (the actions that are invoked when pressing "Accept" and "Clear" buttons, if present), to allow to execute them from the toolbar of HIPE. The simplest implementation would be to create and assign those actions to your buttons in your setTask(TaskApi) method and then to return them from the buttons when asked:
    public Action getRunAction() {
        return runbutton.getAction();

    public Action getResetAction() {
        return resetButton.getAction();
and the two implicit contracts inherited by the Extension Registry
  • Be JComponent
  • Have an empty constructor

The Rotate Panel example (herschel.ia.task.example.RotatePanel):

Register a Task Panel

The registration of the Task Panel Component is done again in the via the Extension Registry with the usual syntax (please note the name of the factory: factory.editor.tool.task.signature).

        "Rotate Task Panel",

See also the Extension Registry documentation for more details.

Adding a Tool that is not a Task

If you have an existing task and want to make it available in HIPE, you just need to follow the steps described in the above section.

Now, a task has its limitations. It is somewhat an atomic operation for which you provide some inputs and expect some result.
Therefore, it is not expected for acting interactively with a user, and it is not meant for holding internal status either, that a user can modify during its execution.

If you need more flexibility, you can write your own implementation of the Tool interface.
Besides, you would most probably need a viewer associated to your tool, for letting the user interact with it.

This follows in some way the MVC pattern: your target data is the Model, your associated viewer is the View, and your tool is the Controller.

Tool Implementation

In order to write a tool, Tool interface needs to be implemented. Instead of doing it directly, it is encouraged to extend AbstractTool.

The information to be provided is passed to one of its constructors in a super call from the derived class:

    /** Constructor for a tool with a single parameter and general category. */
    protected AbstractTool(String name, Parameter primeInput)

    /** Constructor for a tool with a single input parameter. */
    protected AbstractTool(String name, Parameter primeInput, Category... categories)

    /** Constructor for a tool with multiple input parameters and general category. */
    protected AbstractTool(String name, Parameter primeInput, List<? extends Parameter> inputs)

    /** Constructor with all arguments. */
    protected AbstractTool(String name,
                           Parameter primeInput,
                           List<? extends Parameter> inputs,
                           Category... categories)
You provide the variable types you are interested in within the prime input: just return a ia.gui.kernel.ToolParameter initiated with the proper class of data you want to handle:
new ToolParameter("data", MyTargetDataType.class)

More conditions for checking whether the tool can react on a particular variable can be added by providing a ParameterValidator to the prime input.

The actual job to be done can be delegated to a third object (the "tool object"), or just be executed by the tool class itself.
This latter case is the default, otherwise, you need to call setToolObject(Object toolObject) in your constructor.

Moreover, you may return the categories you think the tool is meaningful for, by providing the proper ones in the super call.

Naming conventions

Conventions for names of a tool class and its variable in the Tasks view are similar than those for tasks. For example, a tool for spectrum filtering could be called:

     Name of the Class              : SpectrumFilterTool
     Name of the Tool (getName())   : spectrumFilter
     Name of the variable in Jython : spectrumFilter

Tool Viewer

Every tool has an associated viewer, which must implement (by extending or one of its subclasses).

Tool Registry

Once you have your tool and the corresponding viewer, you need to register them like this:
# Associate the tool with the viewer
                 "Spectrum Filter Tool",

# Register the tool so it is automatically available for the proper variables in HIPE
from herschel.ia.gui.kernel import ToolRegistry
from import SpectrumFilterTool
spectrumFilter = SpectrumFilterTool()

__all__ = [ "spectrumFilter", "SpectrumFilterTool", ... ]

Communicating Tool & Viewer

In the viewer, you can access the tool and the selected data within the makeEditorContent method provided by AbstractEditorComponent.
At this point, you can let the tool know about the viewer as well, if you want:
protected boolean makeEditorContent() {

    // Get the tool and the selected data
    ToolSelection selection = getSelection();
    Tool   tool = selection.getTool();
    Object data = selection.getSelection().getValue();

    // Optional - you would need to provide a setViewer method

    // Build the editor contents ...

Simple sample

This simple reproducible example wraps up the just explained steps altogether.
It is just a button whose label is changed by the tool when the user clicks on it:

    1. The tool class

public class SimpleButtonTool extends AbstractTool {

    private ArrayData _data;
    private boolean _flag = true;

    public SimpleButtonTool() {
	super("simpleButton", new ToolParameter("data", ArrayData.class));

    void setData(ArrayData data) {
	_data = data;

    void updateLabel(JButton button) {
	int size = _data.getSize();
	int rank = _data.getRank();
	button.setText("Data has " + (_flag? "size " + size : "rank " + rank));
	_flag = !_flag;

    2. The viewer class

public class SimpleButtonToolComponent extends AbstractEditorComponent<ToolSelection> {

    private static final long serialVersionUID = 1L;
    private static int _counter = 1;
    private SimpleButtonTool _tool;

    public SimpleButtonToolComponent() {
	super(new BorderLayout());

    protected Class getSelectionType() {
	return ToolSelection.class;

    protected boolean makeEditorContent() {
	final JButton button = new JButton();
	setName("Button Tool " + _counter++);
	_tool = (SimpleButtonTool)getSelection().getTool();
	button.addActionListener(new ActionListener() {
	    public void actionPerformed(ActionEvent e) {
	return true;

    public Icon getComponentIcon() {
	return IconLibrary.VARIABLE;

    3. The registration

REGISTRY  = ExtensionRegistry.getInstance()

                 "Button Tool",

from herschel.ia.gui.kernel import ToolRegistry
from import SimpleButtonTool
simpleButton = SimpleButtonTool()

# cleanup
del(ExtensionRegistry, Extension, REGISTRY, COMPONENT)

__all__ = [ "simpleButton", "SimpleButtonTool" ]

    4. Executing the example

For executing this simple tool, just include it in a package owned by you, open the workbench in HIPE, and execute the following in the console:
x = Int1d.range(12)
y = Double2d([[1,2,3],[4,5,6]])
Then open the x and y variables with the Button Tool and click the button: its label is updated by the tool.

Triggering Events

For a full detailed section about triggering events have a look at DpHipeCommonUtilities.

Topic attachments
I AttachmentSorted ascending History Action Size Date Who Comment
PNGpng crop_closed.png r1 manage 8.1 K 2010-06-02 - 11:55 JavierDiaz crop with closed sections updated to the new look of tasks
PNGpng crop_input_new.png r1 manage 13.8 K 2010-06-02 - 11:54 JavierDiaz crop input updated to the new look of tasks
PNGpng crop_input.png r1 manage 14.5 K 2009-09-29 - 16:09 JaimeSaiz crop task with input highlighted
PNGpng crop_modifier_new.png r1 manage 13.7 K 2010-06-02 - 11:53 JavierDiaz crop modifier updated to the new look of tasks
PNGpng crop_modifier.png r1 manage 14.4 K 2009-09-29 - 16:09 JaimeSaiz crop task with modifier highlighted
PNGpng crop_new.png r1 manage 13.9 K 2010-06-02 - 11:55 JavierDiaz crop updated to the new look of tasks
PNGpng crop.png r1 manage 13.7 K 2009-09-29 - 15:55 JaimeSaiz  
PNGpng rotate_new.png r1 manage 10.6 K 2010-06-02 - 11:52 JavierDiaz rotate panel updated to the new look of tasks
PNGpng tasks.png r1 manage 13.0 K 2009-09-29 - 16:11 JaimeSaiz Tasks and variables

This topic: Public > DpHipe > WritingTasks > DpHipeTools
Topic revision: r63 - 2010-12-16 - JulioRamirez
This site is powered by the TWiki collaboration platform Powered by Perl